Perfect Pour is a 3” custom-designed plastic nozzle that attaches easily to the end of a standard beer faucet to help bartenders pour draft beer with less foam. Here is how it works: When draft beer is being poured and hits the bottom of the glass it will foam. The Perfect Pour nozzle moves the dispense point closer to the bottom of the glass decreasing turbulence and agitation of the beer when entering the glass. Yes, it's really that simple! Perfect Pour will save your establishment money by reducing the amount of beer being poured down the drain. It shouldn't take more than 5 glasses of beer for the Perfect Pour to pay for itself. It's really a no-brainer! Installation: Twist the flat end of Perfect Pour onto the end of beer faucet so the end with the 45° cut faces the bottom of the glass. Pouring: 1. Place the glass over Perfect Pour nozzle and as close to the bottom of the glass as possible. The edge of the nozzle should also be close to the side of the glass. 2. Open beer faucet and pour keeping the Perfect Pour nozzle in the glass until pour is complete. 3. With Perfect Pour, you may be able to pour beer faster by increasing the applied gas pressure to the keg. Before doing this, check with your beer distributor to make sure you have the proper blend of gas to prevent over-carbonation of the beer. Cleaning: Perfect Pour nozzle should be rinsed daily with fresh, cool water, not to exceed 120°F. Please do not put through a dishwasher. Perfect Pour can be left in place during regular beer line cleanings.